An anti-rattle clip or spring’s main purpose is to keep brake pads from sliding around too much inside the brake caliper. Brakes can make an annoying sound without one of these little devices as you drive around.
While simple devices, anti-rattle clips carry an essential function as the other components. In our guide, you can learn more about our anti-rattle clips necessary when you have new pads?
By the end, you’ll have all you need about why you use these, what they do, and also how to install anti-rattle clips on brake pads. (Read What Size Socket For John Deere Mower Blades)
Brake Parts To Dampen Unwanted Vibrations
You’ll find some parts when you carry out your anti-rattle clips install as part of your brake job.
Caliper Guide Pins
If the caliper won’t move, it could be because of bent or stuck mounting pins.
Even if the guide pins are not damaged, the caliper may bind because of inflated or hardened guide seals or a lack of lubrication, resulting in uneven pad wear.
Abutment Clips
Most vehicles have abutment clips on the caliper bracket lands. They provide a uniform surface for the pads to contact.
Abutment clips with fingers to hold the pad in place are available. These are consumable brake system components, not just because of rust and wear but also because the anti-rattle features might wear out.
On some new vehicles, new abutment clips aid push the pads back from the rotor, reducing drag and allowing for reduced wear on pads and rotors.
Anti-Rattle Clips
Spring and anti-rattle clips are weakened by heating and cooling cycles.
Weak parts cause excessive caliper/pad movement or binding; thus, you get noise and other issues.
How To Install Anti Rattle Clip on Brake Pads
- Using a socket wrench, carefully loosen the nuts and remove the brake caliper from its mounting point.
- Turn your caliper over and then you can remove the brake pad retaining pins using your screwdriver.
- Remove the brake pads from the caliper and throw them away.
- Between the new brake pads, place the anti-rattle clip. Then, align the holes on the metal backing plates of the brake pads with the anti-rattle clip’s loops.
- Using a flat head screwdriver, press the brake caliper pistons into the caliper housing, then slide the brake pads and anti-rattle clip into the caliper.
- Align the holes in the metal backing plates of the brake pads with the holes in the brake caliper.
- Make that the anti-rattle clip loops are parallel to the brake pad holes.
- Place the retaining pins through the anti-rattle clip loops, caliper, and brake pads. Using a screwdriver, tighten the retaining pins.
- Reinstall the brake caliper onto the vehicle and tighten the caliper bolts.
Note, if your caliper bolts are on the rear of the rotor, your wear indicator will be on the bottom inner.
Where Do Anti Rattle Clips Go?
You may ask, are anti rattle clips necessary? Indeed, they are important. It is between the pad and caliper bracket where you find these anti-rattle clips.
They contain the tabs on the ends of pads, so the clips that come into contact with the rotor before the pad material runs out an alert you the pad material is running low.
The brake anti-rattle clip keeps the brake pad in place and reduces noise and vibrations.
Because of the heating and cooling cycles of the brakes, these clips, which are usually composed of metal, might weaken with time. (Learn How To Remove Stripped Hex Screw)
This can cause brake noise, pad movement, and uneven pad wear.
What are caliper abutment clips?
Most automobiles have affixed clips on the caliper bracket. They provide a uniform surface for the pads to contact.
New abutment clips reside to help push the pads back from the rotor, reduce drag and reducing rotor and less wear on pads.
How to Install the Anti Rattle Clip on Brake Pads
- Unbolt the brake caliper from the mounting point using your socket wrench.
- Place your anti-rattle clip in between your new brake pads.
- Push your brake caliper pistons into the caliper housing with a flat head screwdriver and slide the brake pads and anti-rattle clip into the caliper.
Are brake pad retaining clips necessary?
These clips help improve fuel economy while eliminating brake noise. These springs/clips can be tough to install, but they must.
The small devices help keep brakes cooler, reduce noise and increase pad life as the clips fit between pads and rotor to push them apart.
Are abutment clips necessary?
Because abutment clips face brake system heat, they need replacing as part of a complete brake job.
Even if a clip appears new, it should be replaced when the pads are changed. Metal fatigue and heat often lead to invisible damage and also for your pads to wear prematurely.
Is it possible to install brake pads backward?
Installing brake pads backward happens more often than you think, yet most now are made to go one way and won’t affect the brake rotor thickness.
Do EBC brake pads need shims?
As new pads bed in to your new or old rotor, brake squeal is a common sound. Early EBC rear fitting pads lacked noise shims. If you experience rear brake noise, you can often get these for no cost from suppliers. (Learn Why Does My Temperature Gauge Go Up And Down)
Do you need brake pad shims?
Unlike shims, brake pads don’t need them and work perfectly fine without them. No disc brake lube is required; however, a light coating on the brake backing plate is recommended.
Do you need to remove brake fluid cap when changing brake pads?
Remove the brake fluid reservoir cap before resetting the caliper piston. Again, you’ll be fighting against brake fluid pressure.
