Loctite’s Manufacturer, Henkel Loctite (loctiteproducts.com), was the first to market a product where you could apply only a thin layer to seal threaded fasteners and prevent them from working loose because of very narrow gaps. The thread locker solution was ideal for anyone wanting not to stock expensive lock nuts and lock washers on the off chance they would need them.
High-strength thread locker solutions are semisolid anaerobic adhesives used in mechanical fastener assemblies to seal and offer permanently locking studs and threaded components. Typically, threadlockers achieve fixture strength at least 10 minutes before hardening into a thermoset plastic, providing maximum strength through curing.
However, depending on the type and strength of the thread locker, the time may vary. In our guide, you can learn more about the blue thread locker dry time and the overall blue Loctite cure time.
By the end, you’ll know how to use a Loctite threadlocker, the shelf life according to technical data sheets, and how this permanent locking compound can help with your tasks. (Learn How To Dispose Of Turpentine)
Threadlocker Grades: What’s the Difference?
Red Loctite Adhesive
The greatest strength threadlocker adhesive is the primerless grade red threadlocker.
The Red Loctite cure time is 24 hours. The red threadlocker compound comes in both a liquid and semisolid anaerobic.
Because the red high-strength threadlocker material is so strong, the red threadlocker involves heating to be disassembled. Thus, for the bond to lose strength, you will require heat from somewhere such as a heat gun rather than a naked flame.
Loctite Blue 243 Medium
The threadlocker adhesive of Loctite blue is a medium-strength threadlockers. The curing process takes 24 hours, and the Loctite threadlocker can be disassembled using hand tools.
You can find blue thread lockers in liquid, stick, paste, and gel forms.
There’s also a tape and Loctite Blue 242 thread locker that isn’t as strong as the world’s first and only of its kind blue threadlocker that doesn’t require priming, which according to the datasheet, sets in a few minutes and fully cures in 24 hours.
Loctite 243 has slightly better oil tolerance than 242, so industrial oils on threaded fasteners won’t affect what was supposed to be permanent.
Purple Loctite Adhesive
One of our most popular products is Loctite purple thread locker will fully cure in 24 hours. It is a low-strength thread locker and can be used on metals like aluminum and brass.
It protects threads by applying a thin layer of Loctite on small screws like carbs and spectacles that are supposed to be permanent.
How Long Does Loctite Take To Dry?
The bottles are made from something that’s air permeable. Besides this, according to the data sheet, it sets in about 10 minutes and fully cures in 24 hours, depending on the type you use.
You may also wonder how to make Loctite dry quicker? There are occasions when you need Loctite to dry faster than the recommended times. (Learn How To Fix Loose Sun Visor)
Here are the quick steps to make it dry quicker:
- Apply only a thin layer of Loctite adhesive.
- Apply clamps to the edges of your metal objects or sleeve retainer to tighten them as much as possible.
- Remove as much humidity from the air as you can. Moisture increases the curing time of Loctite adhesive.
If the air temperature is below 22C, place a space heater near the items. Because the heater is a fire danger, keep at least 2 feet between the heater and the application area.
Regulate the heater to bring the air temperature to a minimum of 25 degrees Celsius for a faster cure.
Use primers or activators when working with inactive base metals. These aid in the speeding up of the bond formation reaction.
How does Loctite harden?
Loctite threadlockers are one-component adhesives that cure into a durable thermoset plastic without air and in contact with active metal. They fill any spaces between the interface threads, thus unitizing the assembly and preventing loosening.
What is the drying time of Loctite 271?
It takes 10 minutes to set and 24 hours to cure completely. With a moist cloth, clean the adhesive residue immediately.
Combining soaking in methylene chloride and mechanical abrasion, such as with a wire brush, can remove the cured product.
What exactly is the function of thread lock?
Thread-locking fluid, also known as threadlocker, is a thin, one-component glue applied to the threads of fasteners like screws and bolts to keep them from loosening, leaking, or corroding.
Thread-locking fluid is thixotropic, meaning it may flow smoothly over time while still resisting shocks and vibrations.
What’s the difference between Loctite red and Loctite blue?
The strongest threadlocker is Loctite Red Threadlocker. This substance cures entirely in 24 hours and comes in two forms: liquid and semisolid anaerobic.
Because the red products are so potent, they must be disassembled with heat. There’s also a red threadlocker that doesn’t require priming.
Is Blue Loctite a long-term solution?
This strength is ideal for fasteners up to 20 mm. Loctite Blue has also been capable of dealing with minimal contamination in industrial oils. (Learn How To Thaw Frozen Drain Pipes Underground)
The entire cure period, like Loctite Purple, is roughly 24 hours.
Is Green Loctite more powerful than Red Loctite?
The color red is supposed to last forever. Green is thin and will wick into even the tiniest spaces; and also meant to be a permanent fix.
When heated to 350 degrees F, both lose their strength.
High Strength thread locker is red, bearing and sleeve retainer is green.
Is there a shelf life for Loctite?
Loctite (loctiteproducts.com) goes bad, according to Loctite’s producer, Henkel. According to the technical data sheets, both thread-lockers 271 (red) and 242 (blue) have a shelf life of 24 months unopened and 12 months once the tube is opened.