How To Remove Gorilla Tape Residue

You probably use Gorilla Tape frequently for little repairs because it is so helpful. It’s great to have it on hand if you find yourself in an emergency when you need to fix almost everything. The versatility of this tape makes it incredibly useful. People use it for various crafts, and because it is weather-resistant, it can occasionally be used outside.

Depending on where you have used the tape can leave you with a different removal means. Many people decide to use Goo Gone adhesive remover, yet if you don’t have Goo Gone at home, use other practical options. So, if you want to know how to remove gorilla glue from car paint, you won’t use a razor blade as you can cause more damage.

However, after you remove Gorilla tape, the adhesive leaves a sticker residue that collects dirt and grime. The glue residue is challenging to remove because the Gorilla tape glue works so well in many areas. In our guide, you can learn more about using various things to clean off this glue residue.

By the end, you’ll know how to get gorilla glue off leather and clean many other surfaces free from the residue left by Gorilla tape or even the regular Gorilla glue. (Read Does Gorilla Glue Work On Leather)

Ways to Remove Gorilla Tape Residue

Top Gorilla Tape Residue Remover

You may ask, with all the varied ways of removing Gorilla glue residue, is Gorilla tape flammable? You don’t want to use flammable liquids to find your tame will set on fire.

Gorilla tape isn’t flammable, and at worst, it could shrink into a semi-molten ball of Goo.

1. Use Gorilla Tape On Itself

Try Gorilla Tape to remove the residue. Sticky tape may remove residue from the affected area.

Start tape on the residue. You should be able to drag up bits of residue this way.

When there’s a lot of residue to remove, this could take a while, and you may want a quicker solution.

You should get excellent results if you stand there and use tape to remove residue.

If this idea fails, try more sophisticated ones. There are several ways to remove residue.

2. Use WD-40 Spray For Tape Remover

WD-40 is often used to lubricate squeaky doorknobs, hinges, and many more stuck items. The water dispersant also offers many automotive uses.

  1. WD-40 spray can remove tape residue, and to do this; you’d cover the Gorilla Tape residue with WD-40.
  2. Allow it to sit for at least 5 minutes to soften the residue.
  3. Wipe with a clean cloth, carefully rub the area to remove the last residue, and wipe it clean.

Some plastic surfaces may be damaged, although you can use WD40 to remove adhesive from wood, metal, rubber, and plastic covering.

3. Mild-Solvents

You could also work with acrylic-based solvents to get rid of the residue. Mineral turpentine or mineral spirit can be found in most stores.

Consider mild solvents before using anything stronger. Mineral spirits, known as mineral turpentines, are used on acrylic-based surfaces using; mineral spirits is the best and even work with Super Glue.

Mineral spirit is a mild solvent; because of its nature, you can use it on acrylic surfaces.

Ensure you wear gloves in case of irritation and rinse with soap and water to remove any oil stain on the surface.

You use an old rag and this solvent together. Before washing it clean with the rag, soak the area with the solvent to remove the residue.

Using a solvent can work, but check a small surface area first, so it doesn’t harm the material.

Bare wood, for example, can leave an oil stain from mineral spirit, and then you can’t paint over this area. (Read Gorilla Glue On Skin Dangerous)

4. Rubbing Alcohol

Sometimes just doing something straightforward like this will remove the residue.

To begin, you must dunk a small piece of clean fabric in a bit of rubbing alcohol. You can begin massaging the area with the tape residue once the cloth has saturated.

Things should become more pliable, and the residue may wash off the towel. With able effort, you might make everything appear tidy.

Using this technique might make it able to remove stubborn tapes good and residue. Giving it a shot is worthwhile as most individuals frequently apply alcohol on their skin to clean wounds.

5. Acetone

To remove Gorilla tape residue, acetone works well, or even an acetone-based solvent, especially on stains that other solvents struggle to remove. Gorilla stains on textiles and hard surfaces can be removed with acetone (inconspicuous test area first).

The process is straightforward. To get rid of the bothersome stains, follow these process steps:

  1. Get a clean cloth
  2. Soak it in acetone.
  3. Sit it on the glue residue for five minutes.
  4. Remove after and wipe the surface.
  5. Continue the cleaning process until stains have gone.
  6. Rinse heated soapy water.

6. Generic Adhesive Remover For Gorilla Tape Residue

Some examples of adhesive remover include fluids designed for cigarette lighters. It is possible to get rid of the stain left by gorilla tape by using this.

Goo-gone can also help remove the residue left behind by gorilla tape. It is an excellent solution for all sticky issues that may arise from using tapes or stickers.

When you want to get rid of the residue, you can use this with a clean towel.

Besides this, you can use many types of oil and grease as these break down the adhesive.

However, these are best used on metal, glass, or hard surfaces; you can use heated soapy water to clean away oil and glue residue when you remove Gorilla tape for the best result.

A paint thinner can be used, yet this could strip or harm the surface material, so you check first or skip using this altogether.

Alternative ways to Remove Gorilla Tape Residue

Alternative Residue Removal Tips

Physically Scrape it.

When you need to remove a small amount of glue from the paneling, molding, or floor, use a putty knife to scrape the adhesive off of the surface.

Just be careful not to drive the knife’s edge too hard on the
surface to avoid causing damage. Consider using a blade to scrape the residue off for mirror glass or windows.

Loosen The Glues Grip

Consider using a small amount of rubbing alcohol, which can be used as a pressure-sensitive adhesive that does not require a solvent. However, when rubbing alcohol is used, the residue from the adhesive will lose its ability to adhere and begin to precipitate.

Acetone, widely known as nail polish remover, is another solvent that may be used.

Remember that alcohol and acetone both have the potential to damage painted surfaces, so exercise extreme caution when working with either of these compounds.

If your glue is on a metal hard surface or a wall, you can use the heat from a blow torch. When finished, you may not need to rub the surface with a cloth as the blow torch will have burned all the adhesive residue to a crisp. (Read How To Thaw Pex Water Lines)

Don’t Forget The Necessary Precautions:

  1. Never use an acetone-based solvent unless in a well-ventilated space.
  2. Apply the cleaning stuff onto a clean white rag for a sensitive surface.
  3. Never use a hair dryer on too hot to heat adhesives or sticker residue; it could melt the surface.
  4. Never use a razor blade to scrape residue on wall tile or glass, or it could damage the surface.
  5. Don’t use coconut or vegetable oil in low temperatures; they can solidify and won’t soak into the tape or glue.
  6. Wear gloves when using adhesive removers or blades

How To Remove Gorilla Tape Residue